How do I charge the SimplyGo Mini batteries with the AC Wall Power Supply?

Charging the Battery with the AC Power Supply

Important: The first time you charge the battery, be sure to charge it fully.

Do not use the DC power cord to do so; instead use AC power.

Note: The battery will begin charging whenever you connect the device to an AC outlet, regardless of whether or not it is in use. To charge the battery using the AC Power Cord provided with your system, follow these steps.

1.Connect the AC Power Supply’s output cable to the SimplyGo Mini power input connector.

2.Connect the AC Power Cord’s connector into the AC power supply.

3.Connect the AC Power Cord’s plug into an AC outlet installed to meet national or regional electrical code.
4.When charging is complete (this takes up to 4 hours for the standard battery), is connect the AC Power Supply and store it with the AC Power Cord for future use.

Note: The AC Power Supply is equipped with a green light, which illuminates as soon as you connect the device to an energized AC power source.

To run the device using AC power, first make sure you have a battery installed. Then, follow these steps:

1.Connect the output cable of the AC Power Supply to the SimplyGo Mini power input connector, aligning the green dots on the power cord and device as shown below.

2.Connect the AC Power Cord’s connector into the AC power supply.

3.Connect the AC Power Cord’s plug into an AC outlet installed to meet national or regional electrical code.