The wishlist name can't be left blank
Loading...

Inogen One G4 Replacement Column Pair (Sieve Beds)

$99.00
In stock
SKU
RP-406

Bread Checkout
 

Replacement column pair (sieve beds) for your Inogen One G4 Portable Oxygen Concentrator.

** Please allow an extra 2-4 weeks for delivery of this item.   
Replacement columns have a shelf life and expiration date. We will order the columns when you need them to make sure you are getting brand new equipment.


Inogen One G4 Replacement Column Pair - Overview

Replacement column pair (sieve beds) for your Inogen One G4 Portable Oxygen Concentrator.


Your user manual provides easy step-by-step instructions to replace the columns, without needing to send your concentrator out for a repair.


The sieve beds of the Inogen One G4 Replacement Columns transform normal air with low quantities of oxygen to provide a high concentration of oxygen. These detachable metal columns make it simple and quick to service the Inogen One G4 without having to send it in for servicing.

FAQs

What Are The 5 Reasons to Buy Inogen One® G4 Replacement Column?

  • Customers may easily remove and replace it.
  • Save time and money.
  • The column pair is easily swapped out without the need for any tools.
  • After a lengthy period of usage, the material will deteriorate.
  • Used and sold as a pair.

 

User Guide

Inogen One® G4 Replacement Column Change Procedure

  1. To turn off the Inogen One® G4 concentrator, by pushing the power button.
  2. If applicable, remove the Inogen One® G4 concentrator from the travel case.
  3. Remove the Inogen One® G4 concentrator's battery.
  4. Turn the Inogen One® G4 concentrator on its side to reveal the bottom. On one side of the gadget, the metal column assembly can be seen.
  5. Push the latch button away from the columns to unlock the column assembly.
  6. Pull on the column pull handle while holding the button open to move the column assembly out of the device.
  7. Remove the columns from the Inogen One® G4 entirely. Both columns are taken out as a single unit.
  8. Remove the new column assembly's dust covers. Make sure the dust caps aren't obstructed by dust or debris.
  9. In the Inogen One® G4 concentrator, place the column assembly. Do not leave the column ends exposed; as soon as the dust covers are removed, the column assembly should be placed into the Inogen One G4.
  10. Insert the column assembly into the Inogen One® G4 concentrator until the columns are fully seated. The spring-loaded latch button should fully shut after being pressed.
  11. Plug the power supply AC cord into an electrical outlet and connect the AC power supply cord to the Inogen One® G4. The Inogen One® G4 concentrator should not be turned on.
  12. For 5 seconds, press and hold the plus (+) and minus (-) keys. A “sieve reset” notice will appear on the screen. When the message appears on the screen, release the button.
  13. Once you've pressed the alert button, the screen will say "sieve reset successfully."
  14. To switch on the Inogen One® G4 and operate it normally, press the power button.

When placing an order for this item, please allow an extra 2-4 weeks for delivery. **

We will order the columns when you do, ensuring that they are brand new. Replacement columns have a shelf-life and they will expire if they are not used. We want to do our best to provide you with the newest equipment, direct from the manufacturer.

Inogen One G4 Replacement Column Pair (Sieve Beds) Parts

Write Your Own Review
You're reviewing:Inogen One G4 Replacement Column Pair (Sieve Beds)
Your Rating
Inogen One G4 Replacement Column Pair (Sieve Beds) - Customer Questions
No Questions
Please, mind that only logged in users can submit questions