Salter Labs Humidifier Connector Adapter Tubing for Various Oxygen Concentrators (15 Inches)

$4.95
In Stock
SKU
SO-676

  • Buy 10 for $3.45 each and save 30%
  • Buy 20 for $1.95 each and save 61%
  • 5 inches long
  • Molded connector and male thread grip
  • Attaches humidifier bottle to concentrators

salter

This Salter Labs humidifier connector adapter tubing is used to attach a humidifier bottle to most continuous flow oxygen concentrators. The tube is approximately 15 inches, with one molded connector end and one male thread grip end.

The male end of the Humidifier connector Adapter Tube should be screwed into the oxygen outlet port on your humidifier bottle; the other end should be attached to the tubing outlet port on your oxygen concentrator.

Please refer to your oxygen concentrator's user manual for instructions on using humidification with your oxygen system.

User Guide

Activox Pro Quick Start Guide 

Salter Labs Humidifier Connector Adapter Tubing for Various Oxygen Concentrators (15 Inches) Parts

    Write Your Own Review
    You're reviewing:Salter Labs Humidifier Connector Adapter Tubing for Various Oxygen Concentrators (15 Inches)
    Your Rating
    Salter Labs Humidifier Connector Adapter Tubing for Various Oxygen Concentrators (15 Inches) - Customer Questions
    Can I use tap water in an oxygen concentrator?
    Only distilled water should be used in humidifier bottle for oxygen concentrators. Tap water has minerals that can clog the stem inside the humidifier bottle. this will cause back pressure and a reduction in oxygen flow. Back pressure can also occur which will cause the oxygen concentrator to alarm. Note: use distilled water only. Do not use tap water, bottled drinking water, or home filtered water...
    Please, mind that only logged in users can submit questions
    Salter Labs Humidifier Connector Adapter Tubing for Various Oxygen Concentrators (15 Inches)