How To Charge the SimplyGo Mini Battery?
The SimplyGo Mini battery can be charged while plugged into the SimplyGo Mini device. Simply use the AC or DC power supply provided with your concentrator to begin the charging process. Please note: do not use DC power the first time you charge the battery.
Both standard and extended SimplyGo Mini batteries have a gauge so you can check the amount of charge. To see the level, press the black button on the standard battery, and on the extended battery press the two black buttons simultaneously. The more LEDs that are lit, the greater the amount of charge in the battery. The LEDs will blink when the battery charge is very low. You can charge the battery with the AC power cord that comes with your SimplyGo Mini. With the battery installed connect the AC power supply output cable to the power input connector on a device.
- Connect the AC power cord connector to the AC power supply.
- Connect the AC power cord to a standard electrical outlet.
- A green light will illuminate on the AC power supply when the device receives power.
- Never use or recharge the device without the battery installed.
The standard SimplyGo Mini battery takes approximately 4 hours to reach a full charge, while the extended battery can take up to 8 hours to reach its full charge. An external battery charger is available for purchase, but is not required - the battery will charge any time the concentrator is plugged into power.
It is also important to note that the battery duration will vary, depending on oxygen settings. Battery age will also cause the overall battery life to degrade. If the battery surpasses the recommended number of life cycles, the SimplyGo Mini will alert the user.
