How To Troubleshoot The Drive Pulse Oximeter?

When SpO2 and Pulse Rate are not displayed normally

This could happen when either the finger is not properly positioned or when the SpO2 level of the user is too low to be detected. If this happens, reposition the Drive Pulse Oximeter properly and try again. Call 911 if the device is working but still not showing the patient's readings.

The SpO2 and Pulse Rate are not stably displayed

The reason could be that the finger is not placed inside deep enough. Stop moving and keep the hand stable while taking the reading.

The device is not turning on

The problem could be with the batteries. Try re-inserting the batteries or using a fresh set of batteries and then turn on the device. If this doesn't work then the device is malfunctioning and you should contact the local service center.

The display turns off suddenly

The device is designed to shut down automatically after 5 seconds of inactivity to save power. If this is not the case then insert new batteries.