The wishlist name can't be left blank

Philips Respironics InnoSpire Go Portable Mesh Nebulizer

Starting at

Out of stock


2 Year Warranty
  • Weighs less than 0.25 lbs
  • 4 min per single dose
  • Up to 30 treatments per charge
  • Whisper-quiet treatment

Overview of Philips Respironics InnoSpire Go Portable Mesh Nebulizer

The Philips Respironics InnoSpire Go is truly a portable mesh nebulizer, delivering a full dose of treatment in less than 4 minutes! This handheld device is quick and effective, created with convenience in mind. This portable mesh nebulizer has a modern, simple design and is easy to use. Simply start treatment with the push of a button. Audible and visual signals will let you know when treatment is complete. When the medicine is finished delivering, the device automatically turns off. And with an operating noise level of less than 5 dB, this whisper-quiet nebulizer is perfect to use no matter where you are!

Philips InnoSpire Go With Vibrating Mesh Technology

The Innospire Go uses vibrating mesh technology, ensuring you get your full treatment faster than ever. How does it work? The portable Innospire nebulizer has a small, mesh disc that’s been clinically proven and used in hospitals worldwide. As the mesh vibrates, it pulls the medicine through approximately 1000 precision-formed microscopic holes. The vibrations turn the liquid medication into a fine mist, allowing it to reach deeper into your lungs and reduce your treatment time by 25%. Most treatments take only 4 minutes to complete.

Philips InnoSpire Go - Compact, Intelligent and Simple

The InnoSpire Go portable mesh nebulizer comes equipped with highly efficient vibrating mesh technology to aerosolized prescribed medications. Due to the absence of a motor, this nebulizer is so small that it can easily fit in your hand and can be carried around in your pocket. This wireless device works silently and you don’t have to worry about any delicate parts as there are no wires, cords, and tubes.

Powerful InnoSpire Go Battery Backup

The Philips Respironics Innospire Go Nebulizer may fool you with its little frame but it delivers a lot of power. One single charge can last up to 120 minutes or 30 treatments. The battery can be charged with the standard charger provided with the device. To stop unnecessary battery loss, the device turns off automatically after treatment. With the push of a button, you will be notified with audio as well as a visual signal when the therapy is completed.

Philips InnoSpire Go - Convenient And Comfortable

Philips Respironics has designed this portable mesh nebulizer so that the majority of patients can use it comfortably. The ergonomically designed outlet port of the InnoSpire Go nebulizer has become the favorite of most patients.

It is FAA cleared for usage during flights, cruise ships and other forms of transportation.

Philips Respironics InnoSpire Go Portable Mesh Nebulizer Box Includes

  • InnoSpire Go Mesh Nebulizer with Mouthpiece
  • AC Power Adapter
  • Medium Mask & Mask Adapter
  • Manufacturers Warranty
  • Travel Case & User Manual


How To Use The Innospire Go Portable Mesh Nebulizer?

The Innospire portable nebulizer is simple to use. To insert medicine, simply lift the lid of the device. Next, pour your medicine into the cup, but do not exceed the MAX fill line (the nebulizer can hold 8mL of medicine). Close the lid and attach a face mask (if you are using one). Press the power button to ensure the battery has a charge and that an aerosol is coming out of the mouthpiece.

Place the mouthpiece assembly between your teeth and breathe normally through your mouth. If using a mask adapter, lightly press it against your face around your mouth and breathe normally. The LED indicator will flash and the unit will turn off when the treatment is complete.

How To Clean The Innospire Go Portable Mesh Nebulizer?

The Philips Respironics Innospire Go is constructed in two parts: the mouthpiece, which easily detaches for cleaning, and the rechargeable lithium-ion battery base. When cleaning, avoid getting the battery wet, and be sure to let the mouthpiece completely dry before reattaching. To detach the mouthpiece, simply press the release button. After every use, be sure to rinse the mouthpiece thoroughly and pour out any medicine remaining in the medicine cup. The mouthpiece should be replaced approximately once every 12 months.

*It is recommended to replace the Mouthpiece at least once a year

Daily Cleaning

To clean daily, actively wash the mouthpiece assembly for two minutes with warm water and liquid dishwashing detergent. Rinse thoroughly and let dry before connecting to the handset.

Weekly Cleaning

Once a week, patients should go through a disinfection process to ensure no germs or bacteria are collecting on their Innospire Go mouthpiece. Prior to disinfecting, make sure the mouthpiece is wiped clean. Then, open the medicine cup and submerge the mouthpiece in boiling water for 10 minutes.

InnoSpire Go Mask Cleaning

The Innospire Go nebulizer is compatible with the LiteTouch mask. If you are using a face mask to receive treatment, clean weekly by actively washing for two minutes, or letting it soak in warm, soapy water for ten minutes.

How Does The Innospire Go Nebulizer Battery Work?

The battery for the Philips Respironics Innospire Go is contained in the unit’s handset. Battery life is indicated by the LED circle around the power button. To charge the battery, simply plug the device’s power cord into the rear of the unit while the other end is plugged into the wall. The LED will flash green while the unit charges and turn a solid green when it is completely charged.

Other battery indicator lights on the portable nebulizer include:

SOLID YELLOW: Battery has enough charge for approximately one more treatment.

FLASHING YELLOW: Not enough charge for treatment.

FLASHING GREEN (5x): Treatment finished.

If you experience any issues with your Philips Respironics Portable Mesh Nebulizer, consult your user manual for troubleshooting. If your particular issue is not listed, or you need further assistance, don’t hesitate to contact our knowledgeable customer care team.

Please read the instructions for use for full guidance on use and maintenance of the product.

**Testing done using 2.5ml, Using salbutamol.


Philips Respironics InnoSpire Go Portable Mesh Nebulizer Parts

    Write Your Own Review
    You're reviewing:Philips Respironics InnoSpire Go Portable Mesh Nebulizer
    Your Rating


    2.75 x 1.75 x 5.30

    Product Weight:

    0.29 lbs


    Handset 2 years

    Sound Level

    around 5 decibels

    Philips Respironics InnoSpire Go Portable Mesh Nebulizer - Customer Questions
    Is it better to use the mask or just the mouthpiece with the Philips Respironics InnoSpire Go nebulizer?
    Its neither better nor worse. Just remember to inhale through your mouth when using the mouthpiece. When using the mask, it doesn't matter if you inhale with mouth or nose or both, just be sure that you have a good seal around the mask cushion. Also ...
    How do i clean the Philips Respironics InnoSpire Go mask?
    The InnoSpire Go Mask can be wiped out with a clean damp cloth.  It can also be cleaned with a mild soap and water.  Rinse thoroughly and leave to air dry.
    How do I clean the Philips Respironics innoSpire Go mouthpiece?
    The mouthpiece is only one part, it should be released from the handset for cleaning. After each use Pour away residual medication from the medication chamber. Press the mouthpiece assembly release button to separate the mouthpiece...
    Is the Philips Respironics InnoSpire Go battery replaceable?
    No. The InnoSpire Go has an integrated battery and cannot be replaced.
    Is the Philips Respironics InnoSpire Go multi-voltage?
    Yes. The device can be powered via AC/DC Power Adapter from 100-240V 50/60Hz power source.
    Can I charge the device and take a treatment at the same time on the Philips Respironics InnoSpire Go nebulizer?
    Yes, you can.
    How long does it take to charge the Philips Respironics InnoSpire Go nebulizer battery?
    The first time you charge the battery will take up to three hours and all further charges will take less than two hours to fully charge.
    Benefits of Using the Philips Respironics InnoSpire Go Mouthpiece Assembly?
    The Philips Respironics InnoSpire Go Mouthpiece assembly is sleek and streamlined, designed for easy operation. The mouthpiece assembly is designed to maintain the performance of InnoSpire Go, quickly and efficiently delivering medication to children...
    How to Change InnoSpire Go Replacement Mouthpiece Mesh Assembly?
    Maintaining the InnoSpire Go is fast and simple, with just two easily detachable parts. Simply remove the mouthpiece from the base, and attach the new mouthpiece assembly to the handset clicking it into place.
    Please, mind that only logged in users can submit questions